Kato currently produce two different versions of the KuMoHa 52 series: the first batch (#10-1764) and the second batch (#10-1765). While similar at first glance, the most obvious differences include the windows (smaller on the first batch) and the air vents on the roof (circular on the first batch and a mix of circular and rectangular ones on the second batch). This review looks at #10-1764, the first batch trains.
Background
Built in 1936 and 1937, the KuMoHa 52 series was initially used for fast passenger services around bit cities, particularly Osaka. The first two batches had streamlined front ends that very much reflected the sensibilities of the time. However, with a maximum speed of 95 km/h the streamlining didn't really offer any practical benefits, and a third batch of trains was built with conventional front ends. Inside the trains sported wooden panelling, electric lighting, limited overhead luggage storage, and nicely upholstered seats.
Kato are modelling the trains as they were seen on the Iida Line between 1957 and 1983. This 1500V DC line runs for about 121 miles, much of it single track, and is famous for its attractive scenery and seemingly deserted stations.
Kato KuMoHa 52 (10-1764)
What's in the box?
- Powered driving car and three non-powered cars
- Jumper cables on plastic sprues
- Iida Line booklet
The first thing that grabs your attention is the livery. The combination of blue and cream works really well. It is neatly applied with sharp edges where the two colours meet. Apart from the pantographs, there are no separately fitted details; handrails, etc., are all moulded. Each of the driving cars features one large headlight on the roof and two small red tail lights below the front windows. Removing the body reveals a switch that allows you to switch off the lights if you want to (useful for driving cars in the middle of 8- or 12-car formations).
All the cars are equipped with couplers based on the 'old national' type of coupling used on the Japanese multiple units. These are slightly fiddly to use: they click together just fine, but pulling them apart can require an alarming amount of force.
is as expected for a modern Kato train. The slotless motor and brass flywheel ensure a smooth, steady response to the controller. Maximum speed is considerably above that seen on the real things, and a slightly lower gearing would have been better. But with that said, the trains move smoothly at low voltages, so this isn't a major problem.
All the cars are equipped with couplers based on the 'old national' type of coupling used on the Japanese multiple units. These are slightly fiddly to use: they click together just fine, but pulling them apart can require an alarming amount of force.
is as expected for a modern Kato train. The slotless motor and brass flywheel ensure a smooth, steady response to the controller. Maximum speed is considerably above that seen on the real things, and a slightly lower gearing would have been better. But with that said, the trains move smoothly at low voltages, so this isn't a major problem.
As is usual with Kato coaches and multiple units, you can add internal lighting if you want to but it doesn't come supplied as standard. All the bogies have electrical pick-up, the wheels having pin-point axles that press onto copper contacts.
Like the coaches in the 4-car pack from Kato, this train comes with non-prototypical disc wheels rather than spoked wheels. If you want to replace them with authentic spoked wheels, the ones with 13.2 mm axles are the ones required for these older units. As far as I can tell, you can only replace the un-driven wheels on the trailing cars, not the driven wheels on the power car.
Also included in the box is a leaflet about the Iida Line and the Unitrack assortment produced to replicate it. If you have 210 x 110 cm available, it looks a lot of fun!
The train is presented in a foam-lined slip case for easy storage. A bit larger than a paperback book, this is easily stored on a bookshelf and should keep your train safe when out of use.
As is usual with Kato coaches and multiple units, you can add internal lighting if you want to but it doesn't come supplied as standard. All the bogies have electrical pick-up, the wheels having pin-point axles that press onto copper contacts.
Like the coaches in the 4-car pack from Kato, this train comes with non-prototypical disc wheels rather than spoked wheels. If you want to replace them with authentic spoked wheels, the ones with 13.2 mm axles are the ones required for these older units. As far as I can tell, you can only replace the un-driven wheels on the trailing cars, not the driven wheels on the power car.
Also included in the box is a leaflet about the Iida Line and the Unitrack assortment produced to replicate it. If you have 210 x 110 cm available, it looks a lot of fun!
The train is presented in a foam-lined slip case for easy storage. A bit larger than a paperback book, this is easily stored on a bookshelf and should keep your train safe when out of use.
Conclusion
This a lovely 'old timer' sort of train that will surely grace many layouts. On the plus side, the paintwork is attractive and the moulded detail nice and sharp. Quibbles about maximum speed aside, the train moves quietly and smoothly across the power range thanks to a well-built mechanism.
The two main negatives are more about what's not included but available as upgrades: the spoked wheels and the internal lighting. I'm on the fence about the couplings. They seem to work well but don't look especially durable.
Definitely worth mentioning is the existence of a Sound Card for this type of train. This adds some excitement to driving the train, but doesn't, perhaps, offset the lack of a DCC slot or easy DCC upgrade.
RRP is 19,030 Yen, around £100, which feels like good value for a four-car train.
